Delestage is the process of draining off a tank until the skins remain and aerating the juice in a second tank prior to pumping it back over the skins.
You can perform this process in vintrace using the Rack and Return operation, in combination with a treatment to signify that a delestage was performed.
To set this up, you’ll first need to create the delestage treatment.
Creating the Treatment
To create the delestage treatment:
- Click
Set Up in the sidebar.
- Click Treatments.
- From the Product Treatments tile, click Configure.
- Click New Product Treatments.
- Specify the details for the treatment. When creating the new delestage product treatment, be sure to:
- For the Applies To field, select the Wine/Juice checkbox.
- Enter a useful description for the treatment in the Description field.
- Enter additional details or instructions in the Technique/Procedure Information field.
Performing a Delestage
You can perform the delestage by starting a rack and return operation. You can do this from any of the following:
- The Operations menu on the Product page
- The Operations menu on the Job Management console.
- A work order.
In the Transfer Details, be sure to set Treatment to Delestage, and select your temporary vessel. In a rack and return, the destination tank is used as a temporary vessel and wine is immediately returned to the original tank.
During this process, the Delestage treatment will also be applied to the wine.
After the rack and return has been completed with the delestage treatment, the delestage displays in the history of the wine.
If you included any Treatment/Procedure Information when you created the delestage treatment, those details display on the printed work order along with any details you want to convey to your cellar staff.